SEIMI Marine Equipment: Distributor of solutions for the professionals of the marine and inland waterway industry
Seimi équipements marine

Mini battery switch 200A

Réf : BEP701S

Classic delivery

Public price TTC
93.28 €

Mini battery switch 200A

Réf. BEP701S

  • Dangerous material : non
  • Weight : 0,22 kg.

  • Dimensions (LxWxH) : 69 x 69 x 75 mm
  • Diameter : 52 mm
  • Admissible current : 200A
  • Maximum current : 300 A
  • Length : 2.75 mm
  • Weight : 0,7 kg
  • Height : 3 mm
  • Width : 2.75 mm
  • Battery switch type : Unipolar

The 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110 percent of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Housed in the same dimensions as the 701, and includes the same removable side plates and back coverPlease note selector switches will not separate electronics from harmful engine starting spikesTin-plated copper studs and nutsIgnition-protected