Electromagnetic clutches

Réf : IE1012

The nominal torque values of the electromagnetic clutches are valid only after a break-in period. In order to accelerate the running-in period, we recommend that the clutch be engaged ten or twenty times at high speed with the vacuum pump. The clutch can be used with a rotation opposite to the one indicated by the arrow if the nominal torque is not exceeded by 50%. If the nominal torque is exceeded, the contact faces will slip together; this condition is permissible for a maximum of three seconds. When assembling, check that the pulley is perfectly clean and remove all traces of oil and grease.
More info

Classic delivery

Public price TTC
922.24 €

Electromagnetic clutches

Réf. IE1012

  • Dangerous material : non
  • Weight : 6,51 kg.
  • Catalog page : 416

  • Power supply: 12 or 24 Vdc, ±5% tolerance
  • Maximum rotation speed: 4000 rpm
  • Minimum speed of rotation : 600 rpm
  • Power absorbed by the coil in 12 VDC : 50 W
  • Power absorbed by the coil in 24 VDC: 60 W
  • Diameter of the IE10 pulley : 155 mm
  • Pulley diameter of IE13: 185 mm
  • Maximum working temperature: 100 °C; for information, at a temperature of 70 °C, the dynamic force can decrease by 20
  • Lubrication: for electromagnetic clutches, we recommend the use of ISO 3498 oil, viscosity ISO 3448, capacity 0.075 liter
  • Torque (daNm) : 10,2
  • Voltage (VCC) : 12

50 years in the service
of pro
European expert
of made to measure
+ 40 000
products references