Cristec YPOWER Charger 24 V 20 A with relay card

The Low Battery Voltage alarm is triggered if the battery voltage falls below :

• 10.2 V for 12 V models
• 20.4 V for 24 V models
  

The Motor Fault alarm is triggered if :

• The charger is switched off
• The charger is faulty
• The output fuse has blown
• The charger voltage is less than :
• 11 V for 12 V models
  
• 22 V for 24 V models
  

The standard data available is as follows:

• AC input mains voltage and frequency
• Battery voltage (up to 3 outputs)
• Charger current
• Charger status (Boos, Absorption, etc.)
• Battery temperature
  

The BUS-CAN interface card enables the charger to communicate with a monotoring system or any other device that uses this communication mode. These references are not compatible with the YPO-DISPLAY-R display option.